UCFIBRE™® LTZMSM RTV SERIES

2-144 Cores, LTZMSM Series Double Sheath, Armoured, CSTA LSZH Cable ATARUV

Features

  • Central strength member: Steel Wire with Plastic coating when needed
  • Tube: thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member
  • Longitudinal Water Tightness: Water Blocking Tape and Yarn
  • Inner Sheath: LSZH
  • Armour: Corrugated Steel Tape
  • Outer Sheath: LSZH
  • Suitable for outdoor duct or directly bury application, the outer sheath is UV resistant, steel tape armoring and anti-rodent. 
 
Main characteristics
Test Standard Value Sanction*
Max. installation tension IEC 60794-1-2-E1 3000N fibre strain < 0.33%,
± reversible
Crush(short term) IEC 60794-1-2-E3 3000 N / 100mm < 0.3 dB(MM), 0.1 dB(SM)
Temperature range IEC 60794-1-2-F1 -40 -> +70°C < 0.3 dB/km(MM),
0.1 dB/km(SM)
Water Penetration IEC 60794-1-2-F5C sample=3m,
water=1m
No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm

 
Technical data
No. of Fibres   6,12,24 36,48,72 96  
Design (Elements x Fibres per Tube)   6x6 6x12 8x12  
Loose Tube / Filler - OD mm 1.8 2.0 2.0  
CSM/sheath diameter mm 2.0 2.2 2.0/3.5  
Outer sheath thickness mm 1.8 nominal 1.8 nominal 1.8 nominal  
Cable Diameter mm 12.6 nominal 13.2 nominal 14.5 nominal  
Cable Weight kg / km 215 234 271  
Max installation tension N 3000  
Min. bending radius mm
Without Tension:
10 x Cable OD
Under Maximum Tension:
20 x Cable OD
 
Temperature range °C Installation:
-10°C -> +60°C
Transport. & Storage:
-40°C -> +70°C
Operation:
-40°C -> +70°C
 
Ordering Information
UCFIBRE™® LTZMSM RTV SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTZMSM RTV SERIES to denote that it is a UCFIBRE LTZMSM RTV SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE LTZMSM SERIES FO Cable part number:

 

LTZMSM048A1RTV

The above example describes Single Mode G.657A1 UCFIBRE LTZMSM SERIES FO Cable, with 48 cores.

 

 

LTFIM SERIES CORE QUANTITY
FIBRE TYPE
LTZMSM XXX XX
  012 - 12 CORES024 - 24 CORES036 - 36 CORES

 

048 - 48 CORES

096 - 96 CORES

A1 - SINGLEMODE, G657A1, 9um (yellow sheath)M1 - OM1, 62.5um (orange sheath)M2 - OM2, 50um (orange sheath)

 

M3 - OM3, 50um (aqua sheath)

M4 - OM4, 50um (aqua sheath)