Category: Industrial Communication Solutions

Draka RS-485 22 AWG FPE

Serial Data Communication Cable

 
Construction
Conductor Stranded Tinned Copper
Insulation Foam PE
Colour Pair 1: 1 x white, 1 x blue Pair 2: 1 x white, 1 x orange
Pair 3: 1 x white, 1 x black Pair 4: 1 x green
1st Screen 1 x AL-Mylar Wrap, overlapping ≥ 25 %
Drain Wire Stranded Tinned Copper
Braid Shield Tinned Copper ; coverage ≥ 85%
Sheath PVC/LSZH/LSZH ATARUV
Braid Armour (Optional) Galvanized Steel Wire Braid
Outer Sheath (Optional) LSZH / LSZH ATARUV
Pair 1P 2P 3P 4P
  Nom. Cable OD mm
TC/FPE/OS/TCWB/PVC 6.5 8.5 9.5 11.5
TC/FPE/OS/TCWB/LSZH 6.5 8.5 9.5 11.5
TC/FPE/OS/TCWB/LSZH ATARUV 6.5 8.5 9.5 11.5
TC/FPE/OS/TCWB/LSZH/SWB/LSZH 10.8 13.4 13.8 15.8
         
 

Application

  • For multi-dropped,medium-speed,serial data communication in electrically noisy industrial environments.Application includes industrial networks using RS-485/RS- 422/RS-232 transceivers, for Process Automation (chemicals, brewing, paper mills), factory automation (autos, metal fabrication), HVAC, security, motor control and motion control.Suitable for outdoor installation.

Flame Rating

  • IEC 60332 – 1
 
Electrical properties  
Conductor Resistance (at 20ºC)   ≤ 58 Ω/km  
Capacitance cond. to cond. Nom. 12.5 pF/ft  
Impedance Nom. 120 Ω  
Rated Voltage 300 V  
Mechanical properties  
Operating temperature -20°C to +70°C  
Bend Radius 10 x OD  
     
Ordering Information 
RS-485  part numbers are made up using the table below.
The part number starts with 48 to denote that it is an EIA-485 cable.
The following number shows the number of pairing and the last 2 numbers signifies the AWG.

Example of an EIA-485 part number

48124LB 

The above example describes an RS-485 SWB cable with 1 pair, 24 AWG. Sheath type LSZH, SWB

 

RS- 485 PAIRING AWG SHEATH OUTER JACKET ADDITIVE  
48 X XX X X X  
  
1 - 1 Pair
2 - 2 Pair
4 - 4 Pair



22 -22 AWG


(nil) - PVC
L- LSZH


B - SWB
 RTV- Anti-Rodent, Anti-Termite, UV Resistance  
 

FIRETUF LTFIPNWM Fire Resistance SERIES

Heavy Armoured Cable Nylon + LSZH Sheath, Chemical/Corrosive Resistant

Features

  • Central Strength Member(CSM): glass fiber reinforced plastic rod(FRP), with PE coating when needed.
  • Tube: thermoplastic material containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Fire Resistance Layer: mica tape wrapped around loose tube
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Core Wrapping: water-blocking tape & yarn (dry-core)
  • Inner sheath: HDPE
  • Nylon sheath: Black Nylon Polyamide 12 (PA 12)
  • Outer Armour: Galvanized Steel Wire
  • Outer Sheath: LSZH flame retardant
Technical Data
No.of Flbres 4,8,16 12,24,36,48,72 96
Design (Elements x Fibre/Tube) 6×4 6 x 12 8×12
Loose Tube/Filler – ø mm Nom. 2.3 Nom. 2.0 Nom. 2.0
CSM/sheath diameter mm Nom. 3.0 Nom. 3.0 Nom. 3.0/4.8
Outer sheath thickness mm Nom. 2.0
Cable Diameter mm Nom. 17.9 Nom. 17.9 Nom. 19.7
Cable Weight Kg.Km 531 531 624
Max installation tension N 6000
Min. bending radius mm Without Tension
15 x Cable- ø		 Under Maximum Tension
30 x Cable- ø
Temperature range Installation :
-10°C->+60°C		 Transport & Storage :
-40°C->+70°C		 Transport & Storage:
-40°C->+70°C

Application

The cable is specially designed for harsh environments. The multilayer inner sheath HDPE/PA(nylon) withstands aggressive constituents, fluids that might occur on (petro) chemical plants, aliphatic hydrocarbon resistant. The cable which is low smoke, halogen free and flame-retardant, is suitable for installation under and above ground. – Nylon jacket provides anti-termite protection of the cable
– The steel wire armour provides anti-rodent protection
– The outer sheath is flame retardant compound to Heat & Oil and UV resistant

Flame & Fire Rating

  • IEC 60332-3-24 & IEC 60331-25
Main Characteristics
Test Standard Specified value Acceptance Criteria*
Max. tension at installation (short term) IEC 60794-1-2-E1 5000N Δ I/I fibre strain ≤ 0.6%, Δα reversible
Crush IEC 60794-1-2-E3 4000N/100mm Δα ≤ 0.15dB(SM), 0.3 dB (MM) after test
Temperature Range IEC 60794-1-2-F1 -40 -> + 70ºC Δα ≤ 0.15dB/km(SM), 0.3 dB /km(MM)
Water penetration IEC 60794-1-2-F5C sample=3m, water=1m No water leakage after 24 hour

* Values for single-mode fibres, all optical measurements performed at 1550 nm
* Values for multi-mode fibres, all optical measurements performed at 1300 nm

Ordering Information 
FIRETUF LTFIPNWM SERIES FO Cable part numbers are made up using the table below.

The part number always starts with the letters LTFIPNWM to denote that it is a FIRETUF LTFIPNWM SERIES FO Cable. 

This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.

Example of a FIRETUF LTFIPNWM SERIES FO Cable part number: LTFIPNWM008M1

The above example describes an OM1 (62.5um, Black Sheath)

FIRETUF LTFIPNWM SERIES FO Cable, with 8 cores.

 

LTFIPNWM SERIES
 
Core quantity
 
FIBER TYPE
 
LTFIPNWM
 
XXX
 
XX
 
002~096 : (2 CORES ~ 96 CORES)
 
SM - SingleMode
M1~M4 - MultiMode

LTFPNWM Flame Retardant SERIES

Heavy Armoured Cable Nylon + LSZH Sheath, Chemical/Corrosive Resistant

 

Application

  • The cable is specially designed for harsh environments. The multilayer inner sheath HDPE/PA(nylon) withstands aggressive constituents, fluids that might occur on (petro) chemical plants, aliphatic hydrocarbon resistant. The cable which is low smoke, halogen free and flame-retardant, is suitable for installation under and above ground. – Nylon jacket provides anti-termite protection of the cable
    – The steel wire armour provides anti-rodent protection
    – The outer sheath is flame retardant compound to Heat & Oil and UV resistant

Flame Rating

  • IEC 60332-3-22

Features

  • Central Strength Member(CSM): glass fiber reinforced plastic rod(FRP)
  • Tube: thermoplastic material containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Core Wrapping: water-blocking tape & yarn (dry-core)
  • Inner sheath: HDPE
  • Nylon sheath: Black Nylon Polyamide 12 (PA 12)
  • Outer Armour: Galvanized Steel Wire
  • Outer Sheath: LSZH flame retardant
Configuration
No. of Flbers   4,8,12,24 32 36,48,72
Design (Elements x Fibre/Tube)   6×4 6×8 6×12
Loose Tube/Filler – ø mm Nom. 2.1 Nom.2.1 Nom. 2.1
CSM/sheath diameter mm Nom. 2.3 Nom. 2.3 Nom. 2.3
Outer sheath thickness mm Nom. 2.0
Cable Diameter mm Nom. 16.4 Nom.16.4 Nom. 16.4
Cable Weight kg.km 436 436 436
Max installation tension N 5000
Min. bending radius ( Without Tension) mm 15 x Cable ø
Min. bending radius ( Under Max. Tension)   25 x Cable ø
Main Mechanical and Environmental characteristics  
Test Standard Specified value Acceptance Criteria*  
Max. Tension IEC 60794-1-2-E1 See Configuration 
Δ I/I fibre strain ≤ 0.6%,
Δα reversible
  
Crush IEC 60794 1-2-E3 4000 N/100 mm; reversible 
Δα ≤ 0.15dB(SM), 0.3 dB (MM)
after test
  
Water penetration IEC 60794 1-2-F5C Sample=3m,water column=1m 
No water leakages after 24hours
  
Temperature Range Transportation & Storage -40° C to +70 ° C  
Installation -10° C to + 70° C  
Operation -40° C to +70 ° C   
* Values for single-mode fibres, all optical measurements performed at 1550 nm
* Values for multi-mode fibres, all optical measurements performed at 1300 nm
 
Ordering Information 
LTFPNWM SERIES FO Cable part numbers are made up using the table below.
The part number always starts with the letters LTFPNWM to denote that it is a LTFPNWM SERIES FO Cable.
This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. 
Example of a LTFPNWM SERIES FO 
Cable part number: LTFPNWM008M1

The above example describes an OM1 (62.5um, Black Sheath) LTFPNWM SERIES FO Cable, with 8 cores.
 

 

LTFIPNWM SERIES Core Qty FIBRE TYPE  
LTFPNWM XXX 
                XX
  
 
012-12 CORES
016-16 CORES
024-24 CORES
048-48 CORES
096-96 CORES

 

 
SM-SINGLEMODE, G652D, 9µm
M1-OM1, 62.5µm
M2-OM2, 50µm 
M3-OM3, 50 µm 
M4-OM4, 50µm
  
 

 

 

Draka RS-485 24 AWG FPE

Serial Data Communication Cable

Construction
Conductor Stranded Tinned Copper
Insulation Foam PE
Colour Pair 1: 1 x white, 1 x blue Pair 2: 1 x white, 1 x orange
Pair 3: 1 x white, 1 x black Pair 4: 1 x green
1st Screen 1 x AL-Mylar Wrap, overlapping ≥ 25 %
Drain Wire Stranded Tinned Copper
Braid Shield Tinned Copper ; coverage ≥ 85%
Sheath PVC/LSZH/LSZH ATARUV
Braid Armour (Optional) Galvanized Steel Wire Braid
Outer Sheath (Optional) LSZH / LSZH ATARUV
Pair 1P 2P 3P 4P
Nom. Cable OD mm
TC/FPE/OS/TCWB/PVC 6.2 8.5 9.1 9.8
TC/FPE/OS/TCWB/LSZH 6.2 8.5 9.1 9.8
TC/FPE/OS/TCWB/LSZH ATARUV 6.2 8.5 9.1 9.8
TC/FPE/OS/TCWB/LSZH/SWB/LSZH 10.7 13.0 13.6 14.3

Application

  • For multi-dropped,medium-speed,serial data communication in electrically noisy industrial environments.Application includes industrial networks using RS-485/RS- 422/RS-232 transceivers, for Process Automation (chemicals, brewing, paper mills), factory automation (autos, metal fabrication), HVAC, security, motor control and motion control.Suitable for outdoor installation.

Flame Rating

  • IEC 60332 – 1
Electrical properties
Conductor Resistance (at 20ºC)   ≤ 89 Ω/km
Capacitance cond. to cond. Nom. 12.5 pF/ft
Impedance Nom. 120 Ω
Rated Voltage 300 V
Mechanical properties
Operating temperature -20°C to +70°C
Bend Radius 10 x OD
Ordering Information 
RS-485  part numbers are made up using the table below.
The part number starts with 48 to denote that it is an EIA-485 cable.
The following number shows the number of pairing and the last 2 numbers signifies the AWG.

Example of an EIA-485 part number

48124LB 

The above example describes an RS-485 SWB cable with 1 pair, 24 AWG. Sheath type LSZH, SWB

RS- 485 PAIRING AWG SHEATH OUTER JACKET ADDITIVE
48 X XX X X X 
1 - 1 Pair
2 - 2 Pair
4 - 4 Pair



24 -24 AWG


(nil) - PVC
L- LSZH


B - SWB
 RTV- Anti-Rodent, Anti-Termite, UV Resistance

LONAK® 2 x 1.3 mm² ARM

Building automation cable

Application

  • Fixed indoor installations
  • LON cabling
  • Building automation
Construction
Conductor Stranded copper wires, tinned 1.3 mm²
Insulation PE
Conductor identification 1 x white, 1 x blue
Pair stranding 2 conductors to the pair
Cable lay up 1 pair to the core
Wrapping 1 x PET foil
Rip cord and identification thread yes
Inner sheath PVC, grey RAL 7035
Wrapping 1 x PET foil
Armouring 2 x galvanized steel tape 15×0.20 mm
Outer sheath PE, black RAL 9005
Outer Diameter Nom. 10.3 mm
Weight Nom. 172 kg/km
Mechanical properties
Operating temperature – 30°C to + 70°C
Min. Installation temperature – 5°C
Minimum bending radius 10 x D
Minimum bending radius (during pulling) 15 x D
Maximum pulling force 130 N
Electrical properties at 20°C
Loop DC resistance (max.) 28 Ω/km
Insulation resistance (at 500 V, 1 min.) 100 MΩ*km
Mutual capacitance at 800 Hz (max.) 72 nF/km
Velocity factor 0.67
Max. operating voltage DC 75 V
Test voltage conductor/conductor 3.5 kV
Ordering Information
P/N Product Description P.U
60013680 2×1.3 mm², Building automation cable, LONAK® 2 x 1.3 mm² ARM 1000m/drum

NOMAK®-E

Symmetrical data cable for industrial control equipment

Application

  • These symmetrical data transmission cables are used in control and supervision center for industrial sites. They are suitable for fixed installation inside housings.

Fire Rating

  • Oxygen Index LOI acc. to ASTM – D- 2863: no limit
  • IEC 60332-1
Construction
Conductor Stranded tinned copper 7x 0.29 mm
Insulation PVC (Y)
Conductor identification a-conductor b-conductor
Pair 1 Blue Red
Pair 2 Grey Yellow
Pair 3 Green Brown
Pair 4 White Black
Stranding 2 conductors to pair
Stranding to core (0+4) each 4-pair bundle with numbered
Overall shielding Laminated AL-foil + tinned copper drain wire 0.5 mm²
Outer sheath PVC (Y), grey (RAL 7035)
Outer Diameter Nom. 7.0(2pair) – 23.5(48pair) mm
Weight Nom. 55(2pair) – 747(48pair) kg/km
Mechanical properties
Operating temperature – 30°C to + 70°C
Min. Installation temperature – 5°C
Electrical properties at 20°C
Loop resistance 81 Ω/km
Insulation resistance (at 500 V, 1 min.) 100 MΩ*km
Capacitance at 800 Hz 85 nF/km
for 2 and 4 pairs 90 nF/km
Max. operating voltage 75 V
Relative velocity factor NVP 0.60
Impedance (at 10 MHz) 100 Ω +/- 10 %
Frequency Attenuation
[kHz] [dB/100 m]
9.6 0.3
19.2 0.5
64 0.7
100 0.9
200 1.5
1000 2.9
Ordering Information
P/N Product Description P.U
1003576 2x2x0.5, Symmetrical data cable for industrial control equipment, NOMAK®-E 1000m/drum
1003577 4x2x0.5, Symmetrical data cable for industrial control equipment, NOMAK®-E 1000m/drum
1005546-01000DX 8x2x0.5, Symmetrical data cable for industrial control equipment, NOMAK®-E 1000m/drum

JAMAK®-ARM

Symmetrical Data Cable for Industrial Control Equipment

Application

  • These symmetrical data transmission cables are used in control and supervision center for industrial sites. The cables with armouring and PE outer sheath are suitable for direct buried installation.

Flame Rating

  • Oxygen Index LOI acc. to ASTM – D- 2863: no limit
  • IEC 60332-1
Construction
Conductor Stranded tinned copper 7x 0.29 mm
Insulation PE (2Y)
Conductor identification a-conductor blue; b-conductor red
Stranding 2 conductors to pair
Pair shielding Laminated AL-foil + copper drain wire
Overall shielding Laminated AL-foil + copper drain wire
Inner sheath PVC (Y), grey
Armouring Steel tape, helically wounded
Outer sheath PE (2Y), black
Outer Diameter According to technical datasheet
Mechanical properties
Operating temperature – 15°C to + 70°C
Min. Installation temperature – 5°C
Electrical properties at 20°C
Loop resistance 81Ω /km
Insulation resistance (at 500 V, 1 min.) 2 GΩ*km
Capacitance at 800 Hz 85 nF/km
Max. operating voltage 75 V
Relative velocity factor NVP 0.66
Impedance (at 10 MHz) 70 Ω +/- 10 %
Frequency Attenuation
[kHz] [dB/100 m]
9.6 0.3
19.2 0.5
64 0.7
100 0.9
200 1.6
1000 4.5
Ordering Information
P/N Product Description P.U
60027481 4x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK®-ARM 1000m/drum
60027482 8x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK®-ARM 1000m/drum
60027483 12x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK®-ARM 1000m/drum
60027484 24x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK®-ARM 1000m/drum

JAMAK®-HF

Symmetrical Data Cable for Industrial Control Equipment

Construction
Conductor Tinned stranded copper 7x 0.29 mm
Insulation PE (2Y)
Conductor identification a-conductor blue; b-conductor red
Stranding 2 conductors to pair
Pair shielding Laminated AL-foil + copper drain wire
Overall shielding Laminated AL-foil + copper drain wire
Outer sheath LSZH (H), grey
Outer Diameter Acc. to information in technical datasheet
Mechanical properties
Operating temperature – 20°C to + 70°C
Min. Installation temperature – 5°C
Electrical properties at 20°C
Loop resistance 84 Ω/km
Insulation resistance (at 500 V, 1 min.) 2 GΩ*km
Capacitance at 800 Hz 85 nF/km
Max. operating voltage 75 V
Relative velocity factor NVP 0.66
Impedance (at 10 MHz) 70 Ω +/- 10 %
Frequency Attenuation
[kHz] [dB/100 m]
9.6 0.3
19.2 0.5
64 0.7
100 0.9
200 1.6
1000 4.5

Application

  • These symmetrical data transmission cables are used in control and supervision center for industrial sites. They are suitable for fixed installation inside housings.

Flame Rating

  • IEC 60332-1
Ordering Information
P/N Product Description P.U
60028731 2x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK® -HF 1000m/drum
60028732 4x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK® -HF 1000m/drum
60028753 8x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK® -HF 1000m/drum
60028754 12x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK® -HF 1000m/drum
60028755 24x(2+1)x0.5, Symmetrical Data Cable for Industrial Control Equipment, JAMAK® -HF 1000m/drum

ICS IE ToughCat 7S* Armoured

S/FTP Installation Cable for tougher environments

Construction
Conductor Solid copper wire, ø 0.56 mm (AWG 23)
Insulation foamskin PE
Twisting 2 cores to the pair
Pair screen Al-laminated plastic foil
Cable lay up 4 pairs (PiMF) to the core
Screen Tinned Copper Braid
Inner Sheath Oil resistant, Fire retardant and halogen free LSZH-FR (SHF1)
Outer sheath Grey RAL7035
Armouring Galvanized steel wire braid, Wire diameter 0,25mm
Outer sheath Oil resistant, Fire retardant and halogen free LSZH-FR (SHF1)
Outer Diameter Nom. 10.6 mm
Weight Nom. 168 kg/km
Mechanical properties
Bending radius Installation 8 x D
Installed 4 x D
Temperature range During operation -40°C to + 85°C
During installation -15°C to + 50°C
Fire load 4 pair 1540 MJ/km
Maximum tensile load During operation No load
During installation 200 N
Electrical properties at 20°C ± 5°C
Loop resistance – ≤ 150 Ω/km
Resistance unbalance – ≤ 2%
Mutual Capacitance at 800 Hz Nom. 43 nF/km
Capacitance unbalance (pair/ground) ≤ 1500 pF/km
Characteristic impedance (1-100 MHz) 100 Ω± 5 Ω
(100 – 250) MHz 100 Ω± 10 Ω
(250 – 600) MHz 100 Ω± 15 Ω
Nominal velocity of propagation – ca. 79 %

Application

  • Generic Data transmission. This cable is a Cat7 S/FTP cable is meant for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units. The Steel Wire Braid offers extra robustness rodent protection.

Standards

  • EN50173-1, EN50288-4-1
  • ISO/IEC 11801, IEC61156-5
  • Det Norske Veritas(DNV) specification No. 6-827.50-2

Flame Rating

  • IEC 60332 – 1 & IEC 60332-3-24

Chemical Resistance

  • Mineral oils IRM902(IEC 60811-2-1)
  • Diesel – IRM 903(IEC60811-2-1)

Certification

  • This cable is based on the unarmoured version certified by: Det Norske Veritas(DNV)
Electrical Transmission Characteristics at 20°C
F Attenuation NEXT PS-NEXT ACR PS-ACR ELFEXT PS-ELFEXT Return loss
(MHZ) (dB/100m) (dB) (dB) (dB/100m) (dB/100m) (dB/100m) (dB/100m) (dB/100m)
1 1.8 100 97 98 95 105 105 –
4 3.4 100 97 97 94 105 102 27
10 5.4 100 97 95 92 97 94 30
16 6.8 100 97 93 90 93 90 30
20 7.7 100 97 92 89 91 88 30
31.25 9.6 100 97 92 89 91 88 30
62.50 13.7 100 97 86 83 81 78 30
100 17.4 100 97 83 80 77 74 30
125 19.5 95 92 75 72 75 72 26
155.5 21.9 94 91 72 69 73 70 26
175 23.3 93 90 70 67 72 69 25
200 25.0 92 89 67 64 71 68 25
250 28.1 90 87 62 59 69 66 24
300 30.9 89 86 58 55 67 64 24
600 44.8 85 82 40 37 61 58 22
Ordering Information
P/N Product Description P.U
60027371 ToughCat7S_SWB SFTP 4×2/0.56 500DP 500m/drum

ICS IE ToughCat 7 LSHF-FR MUD

S/FTP Installation Cable 4x2xAWG23/7 for tougher environments

Application

  • Generic Data transmission. This Cat7 S/FTP cable is based on our DNV and Llyod Register certified ToughCat,but with an additional flame retardant, halogen-free, low smoke MUD protecting outer jacket. This cable is meant for use as installation/horizontal cable in tougher electrical and mechanical environment, including ships and offshore units

Standards

  • EN50173-1, EN50288-4-1
  • ISO/IEC 11801, IEC61156-5
  • Det Norske Veritas(DNV) specification No. 6-827.50-2

Flame Rating

  • MUD protecting outer sheath: IEC60754-1, IEC 61034, IEC 60332-3-24
  • Inner Sheath: IEC60754-1, IEC 61034, IEC 60332-3-24

Chemical Resistance

  • Mineral oils IRM902(IEC 60811-2-1)
  • Diesel – IRM 903(IEC60811-2-1)
Construction
Conductor Stranded copper wire, cross section ∅ 0.27 mm² (AWG23/7)
Insulation PE
Twisting 2 cores to the pair
Cable lay up 4 pairs
Pair screen Al-laminated plastic foil around each pair
Overall screen Tinned Copper Braid
Inner Sheath Oil resistant, Fire retardant and halogen free LSZH-FR (SHF1)
Colour Grey RAL 7035
Outer sheath MUD protecting
Colour Grey RAL 7024
Outer Diameter Nom. 10.1 mm
Weight Nom. 112 kg/km
Tensile force N 100
Mechanical properties
Bending radius Without load 8 X D
With load 4 x D
Temperature range During operation -40°C to + 85°C
During installation -15°C to + 50°C
Maximum tensile load During operation No load
During installation 100 N
Electrical properties at 20°C± 5°C
DC Loop resistance – ≤ 138 Ω/km
Resistance unbalance – ≤ 2%
Mean Characteristic impedance @ 100 MHz 100 Ω± 5 Ω
Nominal velocity of propagation – 76%
Electrical Transmission Characteristics at 20°C
Freq. Attenuation NEXT ACR Return loss PS-NEXT
(MHZ) (dB/100m) (dB) (dB/100m) (dB) (dB)
1 2.0 90 88 – 87
4 3.6 90 86 27 87
10 5.5 90 84 30 87
16 7.5 90 82 30 87
20 7.7 90 82 30 87
31.25 9.8 90 80 30 87
62.50 14.0 86 72 30 83
100 17.9 83 65 30 80
155 22.4 81 59 26 78
200 25.6 78 52 25 75
250 28.8 77 48 25 75
300 31.6 73 41 23 70
600 45.7 71 25 20 68
Ordering Information
P/N Product Description P.U
60015695 ToughCat MUD C7 S/FTP 4Px0.27mm² 500m/drum