UCFIBRE® ZICM Series

Zipcord Interconnect Cable, LSZH Sheath

Features

Buffer Coating: : LSZH material, tight buffered fiber
Peripheral reinforcement : Aramid yarn
Sub-unit Sheath : LSZH & OFNR
Outer Sheath : LSZH, 1 ripcord beneath
Suitable for Duct Buried or Indoor/Outdoor Installation

Main characteristics
Test	Standard	Value	Sanction*
Maximum Tension at installation (short term)	IEC 60794-1-2-E1	220N	Δl/l fibre ≤ 0.6%, Δα reversible
Tension operation max	IEC 60794-1-2-E1	66N	Δl/l fibre ≤ 0.2%, Δα ≤ 0.40 dB (MM), ≤ 0.30 dB (SM)
Crush	IEC 60794-1-2-E3	350N / 100mm	Δα ≤ 0.40 dB (MM), ≤ 0.30 dB (SM) , cable integrity

*values for single-mode fibres, all optical measurements performed at 1550 nm *values for multi-mode fibres, all optical measurements performed at 1300 nm

Overview

UCFIBRE™ zipcord fibre optical provides the durability and flexibility to all indoor applications with ruggardized properties, its LSZH properties ensure a safe flame propagation restrictions and is widely used in any zipcord interconnect applications.

Additional Options

Plenum or Riser
Duplex

Technical Data

No.of Flbres

Design

Buffer Diameter - Ø

0.6 ± 0.05

0.9 ± 0.05

Sub-unit Sheath thickness

0.25 nominal

0.3 nominal

0.35 nominal

0.5 nominal

Sub-unit Diameter

1.6 nominal

1.8 nominal

2.0 nominal

2.9 nominal

Outer Sheath thickness

0. 5 nominal

0.5 nominal

0. 5 nominal

0.5 nominal

Cable Diameter (H x W)

2.6 x 4.3

2.8 x 4.7

3.0 x 5.1

3.9 x 6.9

Cable Weight

kg / km

Max installation tension

220

Min. bending radius

Without Tension 10 × Cable-Ø

Under Maximum Tension 20 × Cable-Ø

Temperature range

°C

Installation -10 -> +60;

Transport. & Storage -40 -> +70 ;

Operation -20 -> +70

Flame Retardant

LSZH, IEC 60332-1, IEC60332-3-24

Ordering Information
UCFIBRE™ Zipcord Interconnect FO part numbers are made up using the table below.The part number always starts with the letters ZICM to denote that it is a Zipcord Interconnect FO Cable with a LSZH sheath. This is followed by 1 number which symbolises the cable diameter, 2 numbers to respresent the number of cores and then 2 letters to denote the fibre type. Example of a ZICM part number: - SICM02M1 The above example describes an OM1 (62.5um), Zipcord Interconnect FO Cable (LSZH jacketing), with 2.0mm cable diameter.

Z	IC	M	X	02	XX
ZIPCORD	INTERCONNECT	SHEATH	CABLE DIAMETER	CORES QUANTITY	FIBER TYPE
		LSZH	6 – 1.6mm2 – 2.0mm		SM - SINGEMODE, G652D, 9um (yellow sheath)M7 - G657A2, 9um (yellow sheath) M1 - OM1, 62.5um (orange sheath) M2 - OM2, 50um (orange sheath, Bendbright) M3 - OM3, 50um (aqua sheath, Bendbright) M4 - OM4, 50um (aqua sheath, Bendbright)

下载

产品