Main characteristics | ||||
---|---|---|---|---|
Test | Standard | Value | Sanction* | |
Maximum Tension at installation (short term) | IEC 60794-1-2-E1 | 220N | Δl/l fibre ≤ 0.6%, Δα reversible | |
Tension opération max (long term) | IEC 60794-1-2-E1 | 800 N | Δl/l fibre ≤ 0.2%, Δα reversible | |
Crush (short/long term) | IEC 60794-1-2-E3 | 1500N / 800N / 100mm | Δα ≤ 0.3 dB , cable integrity | |
Temperature range | IEC 60794-1-2-F1 | -20 -> +70°C | Δα ≤ 0.3 dB /km |
Technical data | ||||||
---|---|---|---|---|---|---|
No. of Fibres | 2, 4, 6, 8, 12 | |||||
Design | 1x12 | |||||
Loose Tube / Filler - Ø | mm | 3.0 nominal | ||||
Sheath thickness | mm | 1.5 nominal | ||||
Cable Diameter | mm | 8.1± 0.5 | ||||
Cable Weight | kg / km | 92 | ||||
Max installation tension | N | 1200 | ||||
Min. bending radius | mm |
|
||||
Temperature range | °C | Installation -10 -> +60; | Transport. & Storage -40 -> +70 ; | Operation -20 -> +70 | ||
Flame Retardant |
IEC 60332-3-24 |
Ordering Information | ||
---|---|---|
UCFIBRE™ UTM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters UTM to denote that it is a UCFIBRE™ UTM SERIES FO Cable. This is followed by 3 numbers which symbolises the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE™ UTM SERIES FO Cable part number: UTM006M2 The above example describes an OM2 (50um, Orange Sheath) UCFIBRE™ UTM SERIES FO Cable, with 6 cores. |
UTM SERIES | CORE QUANTITY |
FIBRE TYPE |
UTM | XXX | XX |
---|---|---|
002 – 2 cores004 – 4 cores 006 – 6 cores 008 – 8 cores 012 – 12 cores | SM - SINGEMODE, G652D, 9um (yellow sheath)M1 - OM1, 62.5um (orange sheath) M2 - OM2, 50um (orange sheath) M3 - OM3, 50um (aqua sheath) M4 - OM4, 50um (aqua sheath) |