Main characteristics |
|||
---|---|---|---|
Test | Standard | Value | Sanction* |
Maximum Tension at installation (short term) | IEC 60794-1-2-E1 | 140N | Δl/l fibre ≤ 0.6%, Δα reversible |
Tension operation max | IEC 60794-1-2-E1 | 70N | Δl/l fibre ≤ 0.3%, Δα ≤ 0.30 dB; |
Crush | IEC 60794-1-2-E3 | 350N / 100mm | Δα ≤ 0.30 dB(SM); cable integrity |
Technical Data | |||||||
---|---|---|---|---|---|---|---|
No.of Flbres |
1 |
||||||
Design | Simplex | ||||||
Buffer Diameter - Ø | mm | 0.85 ± 0.05 | |||||
Cable Diameter (A x B) | mm | 2.0 ± 0.1 | |||||
Cable Weight Approx. | kg / km | 4 | |||||
Min. bending radius |
|
||||||
Temperature range | ◦C |
|
|||||
Flame Retardant |
LSZH: UL c(UL) OFNR, IEC 60332-1, IEC60332-3-24 |
Ordering Information | ||
---|---|---|
UCFIBRE™ Simplex Interconnect FO part numbers are made up using the table below.The part number always starts with the letters SICM to denote that it is a Simplex Interconnect FO Cable with a LSZH sheath. This is followed by 2 numbers which symbolises the cable diameter and then 2 letters to denote the fibre type. Example of a SICM part number: - SICM02M3 The above example describes an OM3 (50um), Simplex Interconnect FO Cable (LSZH jacketing), with 2.0mm cable diameter. |
SIMPLEX | INTERCONNECT | SHEATH |
CABLE DIAMETER |
FIBRE TYPE |
B | IC | M | 02 | XX |
---|---|---|---|---|
LSZH | 2.0mm | SM - SINGEMODE, G652D, 9um (yellow sheath) M7 - G657A2, 9um (yellow sheath) M1 - OM1, 62.5um (orange sheath) M2 - OM2, 50um (orange sheath, Bendbright) M3 - OM3, 50um (aqua sheath, Bendbright) M4 - OM4, 50um (aqua sheath, Bendbright) |