Main characteristics | ||||
---|---|---|---|---|
Test | Standard | Value | Sanction* | |
Max. installation tension | IEC 60794-1-2-E1 | 3000N | fibre strain ≤ 0.33%, Δα reversible | |
Crush(short term) | IEC 60794-1-2-E3 | 3000 N / 100mm | Δα ≤ 0.3 dB(MM), 0.1 dB(SM) | |
Temperature range | IEC 60794-1-2-F1 | -40 -> +70°C | Δα ≤ 0.3 dB/km(MM), 0.1 dB/km(SM) | |
Water Penetration | IEC 60794-1-2-F5B | sample=3m, water=1m | No water leakage after 24 hour |
Technical data | ||||||
---|---|---|---|---|---|---|
No. of Fibres | 12, 24 | 36, 48 | 96 | |||
Design (Elements × Fibres per Tube) | 6×6 | 6×12 | 8×12 | |||
Loose Tube / Filler - Ø | mm | 1.8 | 2.0 | 2.0 | ||
CSM/sheath diameter | mm | 2.0 | 2.2 | 2.0/3.5 | ||
Inner sheath thickness | mm | 0.8 nominal | 0.8 nominal | 0.8 nominal | ||
Outer sheath thickness | mm | 1.8 nominal | 1.8 nominal | 1.8 nominal | ||
Cable Diameter | mm | 12.5 nominal | 13.1 nominal | 14.4 nominal | ||
Cable Weight | kg / km | 210 | 232 | 270 | ||
Max installation tension | N | 3000 | ||||
Min. bending radius | mm |
|
||||
Temperature range | °C | Installation -10 -> +60; | Transport. & Storage -40 -> +70 ; | Operation -40 -> +70 | ||
Flame Retardant | IEC 60332-3-24 |
Ordering Information | ||
---|---|---|
UCFIBRE™ LTZMSM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTZMSM to denote that it is a UCFIBRE™ LTZMSM SERIES FO Cable. This is followed by 3 numbers which symbolises the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE™ LTZMSM SERIES FO Cable part number: LTZMSM008M2 The above example describes an OM2 (50um, Orange Sheath) UCFIBRE™ LTZMSM SERIES FO Cable, with 8 cores. |
LTZMSM SERIES | CORE QUANTITY |
FIBRE TYPE |
LTZMSM | XXX | XX |
---|---|---|
012 - 12 CORES024 - 24 CORES 036 - 36 CORES 048 - 48 CORES 096 - 96 CORES | SM - SINGLEMODE, G652D, 9um (yellow sheath)M1 - OM1, 62.5um (orange sheath) M2 - OM2, 50um (orange sheath) M3 - OM3, 50um (aqua sheath) M4 - OM4, 50um (aqua sheath) |