UCFIBRE® LTFGP SERIES

12-96 Cores, Non Metallic Armoured Rodent Resistant Cable,PE Sheath

Features

Central strength member (CSM): glass fibre reinforced plastic material (FRP) with plastic coating when needed.
Tube:thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound.
Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
Longitudinal Water Tightness: WB jelly and water blocking yarn (partial jelly filled).
Peripheral reinforcement: glass yarns.
PE Outer Sheath: HDPE with rodent repellent additive.

Main characteristics
Test	Standard	Value	Sanction*
Max. installation tension	IEC 60794-1-2-E1	1500 N	fibre strain ≤ 0.33%, Δα reversible
Crush(short term)	IEC 60794-1-2-E3	1000N / 100mm	Δα ≤ 0.3 dB(MM), 0.1 dB(SM)
Temperature range	IEC 60794-1-2-F1	-3 0 -> +70°C	Δα ≤ 0.3 dB/km(MM), 0.1 dB/km(SM)
Water Penetration	IEC 60794-1-2-F5B	sample=3m, water=1m	No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm *values for multi-mode fibres, all optical measurements performed at 1300 nm

Overview

LTZMSM Series oers better mechanical protection than LTZSM Series and is able to be deployed in exposed environment over short distances reducing the reliability of ducts and hence better cost efficiency.

Additional Options

PE Sheath (LTZPSP Series)
Steel Wire Armouring
UV Resistance
Anti Rodent & Termite addictives

Technical Data

No.of Flbres

12, 24

36,48

Design (Elements × Fibres per Tube)

6x6

6x12

8x12

Loose Tube / Filler - Ø

1.8

2.1

CSM/sheath diameter

2.0

2.3

2.2/3.7

Outer sheath thickness

1.5 nominal

Cable Diameter

9.9 nominal nominal

10.6 nominal

11.9 nominal

Cable Weight

kg / km

119

Max installation tension

1500

Min. bending radius

Without Tension 10 × Cable-Ø

Under Maximum Tension 20 × Cable-Ø

Temperature range

°C

Installation -10 -> +60;

Transport. & Storage -40 -> +70 ;

Operation -30 -> +70

Ordering Information
UCFIBRE™ LTFGP SERIES FO Cable part numbers are made up using the table below.The part number always starts with the lettersLTFGP to denote that it is a UCFIBRE™ LTFGP SERIES FO Cable. This is followed by 3 numbers which symbolises the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE™ LTFGP SERIES FO Cable part number: LTFGP008M4 The above example describes an OM4 (50um, Orange Sheath) UCFIBRE™ LTFGP SERIES FO Cable, with 8 cores.

LTFGP	XXX	XX
LTFGP SERIES	CORE QUANTITY	FIBRE TYPE
	012 - 12 CORES024 - 24 CORES 036 - 36 CORES 048 - 48 CORES 096 - 96 CORES	SM - SINGLEMODE, G652D, 9um (yellow sheath)M1 - OM1, 62.5um (orange sheath) M2 - OM2, 50um (orange sheath) M3 - OM3, 50um (aqua sheath) M4 - OM4, 50um (aqua sheath)

下载

产品