Main characteristics |
|||
---|---|---|---|
Test | Standard | Value | Sanction* |
Maximum Tension at installation (short term) | IEC 60794-1-2-E1 | 220 N | fibre strain ≤ 0.6%, Δα reversible |
Crush(short term) | IEC 60794-1-2-E3 | 500 N / 100mm | Δα ≤ 0.3 dB (SM), 0.4 dB (MM), no damage |
Temperature range | IEC 60794-1-2-F1 | 0 -> +70 | Δα ≤ 0.3 dB /km (SM), 0.6 dB /km (MM) |
Technical Data | ||||||
---|---|---|---|---|---|---|
No.of Flbres |
2-12 |
|||||
Design | 1 x 12 coloured Fibres | |||||
Outer sheath thickness | mm | 0.7 nominal | ||||
Cable Nominal Diameter | mm | 3.3 ± 0.15 | ||||
Cable Weight | kg / km | 10 | ||||
Max installation tension | N | 220 | ||||
Max operation tension | N | 73 | ||||
Min. bending radius | mm |
|
||||
Temperature range | ◦C | Installation -10 -> +60; | Transport. & Storage -40 -> +70 ; | Operation 0 -> +70; | ||
Flame Retardant |
IEC 60332-1, IEC 60332-3-24 |
Ordering Information | ||
---|---|---|
UCFIBRE™ BICM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters BICM to denote that it is a UCFIBRE™ BICM SERIES FO Cable with a LSZH sheath. This is followed by 3 numbers which symbolises the core quantity and then 2 letters to denote the fibre type. Example of a BICM part number: - BICM002SM The above example describes a singlemode (G652D, 9um) UCFIBRE™ BICM SERIES FO Cable (LSZH jacketing), with 2 cores. |
BARE FIBRE 250um | INTERCONNECT | SHEATH |
CORE
QUANTITY |
FIBRE TYPE |
B | IC | M | XXX | XX |
---|---|---|---|---|
LSZH | 002 – 2 cores004 – 4 cores 006 – 6 cores 008 – 8 cores 012 – 12 cor | SM - SINGEMODE, G652D, 9um (yellow sheath)M1 - OM1, 62.5um (orange sheath) M2 - OM2, 50um (orange sheath) M3 - OM3, 50um (aqua sheath) M4 - OM4, 50um (aqua sheath) |