Category: Fibre Optic Cables

UCFIBRE™® LTZMSM RTV SERIES

2-144 Cores, LTZMSM Series Double Sheath, Armoured, CSTA LSZH Cable ATARUV

Features

  • Central strength member: Steel Wire with Plastic coating when needed
  • Tube: thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member
  • Longitudinal Water Tightness: Water Blocking Tape and Yarn
  • Inner Sheath: LSZH
  • Armour: Corrugated Steel Tape
  • Outer Sheath: LSZH
  • Suitable for outdoor duct or directly bury application, the outer sheath is UV resistant, steel tape armoring and anti-rodent. 
 
Main characteristics
Test Standard Value Sanction*
Max. installation tension IEC 60794-1-2-E1 3000N fibre strain < 0.33%,
± reversible
Crush(short term) IEC 60794-1-2-E3 3000 N / 100mm < 0.3 dB(MM), 0.1 dB(SM)
Temperature range IEC 60794-1-2-F1 -40 -> +70°C < 0.3 dB/km(MM),
0.1 dB/km(SM)
Water Penetration IEC 60794-1-2-F5C sample=3m,
water=1m		 No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm

 
Technical data
No. of Fibres   6,12,24 36,48,72 96  
Design (Elements x Fibres per Tube)   6×6 6×12 8×12  
Loose Tube / Filler – OD mm 1.8 2.0 2.0  
CSM/sheath diameter mm 2.0 2.2 2.0/3.5  
Outer sheath thickness mm 1.8 nominal 1.8 nominal 1.8 nominal  
Cable Diameter mm 12.6 nominal 13.2 nominal 14.5 nominal  
Cable Weight kg / km 215 234 271  
Max installation tension N 3000  
Min. bending radius mm
Without Tension:
10 x Cable OD		 Under Maximum Tension:
20 x Cable OD
 
Temperature range °C Installation:
-10°C -> +60°C		 Transport. & Storage:
-40°C -> +70°C		 Operation:
-40°C -> +70°C		  
Ordering Information
UCFIBRE™® LTZMSM RTV SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTZMSM RTV SERIES to denote that it is a UCFIBRE LTZMSM RTV SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE LTZMSM SERIES FO Cable part number:

 

LTZMSM048A1RTV

The above example describes Single Mode G.657A1 UCFIBRE LTZMSM SERIES FO Cable, with 48 cores.
 

 

LTFIM SERIES CORE QUANTITY
FIBRE TYPE
LTZMSM XXX XX
  012 – 12 CORES024 – 24 CORES036 – 36 CORES

 

048 – 48 CORES

096 – 96 CORES

 A1 – SINGLEMODE, G657A1, 9um (yellow sheath)M1 – OM1, 62.5um (orange sheath)M2 – OM2, 50um (orange sheath)

 

M3 – OM3, 50um (aqua sheath)

M4 – OM4, 50um (aqua sheath)
 

 

UCFIBRE™® MTV SERIES

2-24 Cores, Indoor Tight Buffer Distribution Cable, PVC OFNR Sheath

 

Overview

One of the most widely used UCFIBRE™® Indoor cable, MTV series is excellent for indoor installation that provides a safe setup against flame propagation and its flexible, yet robust construction makes installation at ease.

Additional Options

  • Steel Wire Braiding for armouring protection

Features

  • Tight buffer: Each fibre is coated to 0.9mm with PVC
  • Strength Member : Aramid yarn
  • Outer Sheath: PVC UL1651
  • Suitable for indoor installation requiring flame retardant
Main Characteristics
Test Standard Value Sanction*
Short term tension IEC 60794-1-2-E1 660 N (2F-12F),
1200N (24F)		 Fibre strain ≤ 0.6%,Δα reversible
Max operation tension IEC 60794-1-2-E1 198N (2F-12F),
340N (24F)		 Fibre strain ≤ 0.2%,Δα ≤0.4 db (MM),  ≤0.3db (SM)
Crush (short term) IEC 60794-1-2-E3 1000 N / 100mm Δα ≤0.4 db (MM),  ≤0.3db (SM), no damage
Temperature range IEC 60794-1-2-F1 -20 -> +70°C Δα ≤ 0.6 dB /km(MM),
Δα ≤ 0.40dB/km (SM)

* value of multi mode fibres, all optical measurements perform at 1300nm
* value of single mode fibres, all optical measurements perform at 1550nm

Technical Data
No. of Fibres   2,4,6 8 12 24
Design   1×2,4,6 TB 1×8 TB 1×12 TB 1×24 TB
Tight buffer mm 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05
Cable Nom. Diameter mm 4.8 5.4 6.2 8.8
Cable Nom. Weight kg/km 20 26 33 60
Min. bending radius   Without Tension
10 x Cable Ø		 Under Maximum Tension
20 x Cable Ø
Temperature range °C
Installation
-10 -> +60		 Transport. & Storage
-40 -> +70		 Operation
-20  -> +70
Flame Retardant    UL 1651
Ordering Information
UCFIBRE™® MTV SERIES FO Cable part numbers are made up using the table below. The part number always starts with the letters MTV to denote that it is an UCFIBRE™® MTV SERIES FO cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters yo denote the fibre type. Example of a UCFIBRE™® MTV SERIES FO Cable part number: MTV008M1 The above example describes an OM1(62.5Sum, Orange Sheath) UCFIBRE™® MTV SERIES FO Cable, with 8 cores.
 
MT SERIES CORE QUANTITY FIBRE TYPE
MTV XXX XX
 
002 – 2 CORES
004 – 4 CORES
006 – 6 CORES
008 – 8 CORES
012 – 12 CORES
 SM – SINGEMODE, G652D, 9um (yellow sheath)
M1 – OM1, 62.5um (orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (violet sheath)

UCFIBRE™® MT SERIES

36,48,72,96 Cores, Indoor Tight Buffer Distribution Cable, LSZH

Features

  • Tight buffer: Each fibre is coated to 0.9mm with LSZH
  • Strength Member: Aramid yarn within each sub-unit
  • Sub-unit sheath: LSZH material
  • Central Strength Member: FRP with up-coating
  • Core Wrapping: Polyester tape
  • Outer Sheath: LSZH compliant to IEC 61034, IEC 60754-1 & 2, IEC 60332 -1 & 60332-3- 24
  • Suitable for Indoor Flame Retardant, Low Smoke and Halogen Free Environment
Main Characteristics
Test Standard Value Sanction*
Short Term Tensile Strength IEC 60794-1-2-E1 2800 N (36F,48F,72F), 4400N (96F) Fibre strain ≤ 0.4%, Δα reversible
Maximum installation tension IEC 60794-1-2-E1 1400 N (36F,48F,72F), 2200N (96F) Fibre strain ≤ 0.2%, Δα ≤ 0.4 dB (MM), ≤ 0.30 (SM)
Crush (short term) IEC 60794-1-2-E3 1000N/100mm Δα ≤0.4 db (MM),  ≤0.3db (SM), no damage
Temperature range IEC 60794-1-2-F1 -20ºC->+70ºC Δα ≤ 0.6 dB /km(MM), Δα ≤ 0.30dB/km (SM)

* Values for multi-mode fibres, all optical measurements performed at 1300 nm

* Values for single-mode fibres, all optical measurements performed at 1550 nm


Overview

One of the most widely used UCFIBRE™® Indoor cable, MT series is excellent for indoor installation that provides a safe setup against flame propagation and its flexible yet robust construction makes installation at ease.

Aditional Option

  • PVC Sheath for indoor applications
  • PE Sheath for outdoor applications
  • Steel Wire Braiding for armouring protection
Technical Data:
No. of fibres 36 48 96
Design 6×6 TB 4×12 TB 8×12 TB
Tight buffer mm 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05
Sub-unit Nom. Diameter mm 4.8 6.0 6.0
Cable Nominal Diameter mm 17.7±1.5 17.9±1.5 25.3±1.5
Cable Outer Diameter kg/km 276 244 538
Min. bending radius mm Without Tension, 10x Cable Ø
Under Maximum Tension, 20x Cable Ø
Temperature range °C Installation;
-10 – > + 60		 Transport & Storage;
-40 – > + 70		 Operation; -20->+70
Flame Retardant IEC 60332-3 -24

Please refer to our General Installation, Safety & Handling recommendations before handling.

Ordering Information
UCFIBRE™® MT SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters MB to denote that it is a UCFIBRE™® MT SERIES FO Cable.This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. Example of UCFIBRE™® MT SERIES FO Cable part number: MT048M3 The above example describes an OM3(50UM, Aqua Sheath) UCFIBRE™® MT SERIES FO Cable, with 48 cores.

MT SERIES Core quantity FIBER TYPE
MT XXX XX
036 – 36 CORES048 – 48 CORES096 – 96 CORES
 SM – SINGLEMODE, G652D, 9um (yellow sheath)M1 – OM1, 62.5um (orange sheath)M2 – OM2, 50um (orange sheath)M3 – OM3, 50um (aqua sheath)M4 – OM4, 50um (aqua sheath)